Crafted in the same facility as our U.S.-made instruments, the American Professional II Stratocaster Neck draws from more than sixty years of innovation, inspiration and evolution to meet the demands of today's working player. Our popular Deep "C" neck now sports smooth rolled fingerboard edges and a "Super-Natural" satin finish that provides a supremely comfortable feel. Other features include a 9.5"-radius maple or rosewood fingerboard, bone nut and 22 narrow-tall frets for easy bending.
The neck pocket has 4 offset pre-drilled pilot holes so if it is being installed on a standard body, a fifth pilot hole will need to be drilled.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
Neck ShapeDeep "C"
-
Tuner Mounting ConfigDual Guide Pin
-
Fingerboard MaterialRosewood
-
Neck MaterialAhorn
-
Nut MaterialKnochen
-
Position InlaysWeißer Dot
-
Neck Finish“Super-Natural” Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
-
Truss Rod Nut1/8" Hex Adjustment
-
Truss RodBi-Flex™
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.685" (42.8 mm)
-
Number of Frets22
-
Fret SizeNarrow Tall
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness1st Fret - .820" (20.82 mm), 12th Fret - .920" (22.86 mm)
-
Peg Hole Diameter.404” (10.26 mm)
Features
- Maple Stratocaster neck with walnut stripe
- 9.5"-radius maple or rosewood fingerboard
- 22 narrow-tall frets; black dot inlays
- Satin urethane "super natural" back finish with gloss headstock
- Pre-slotted bone nut
Crafted in the same facility as our U.S.-made instruments, the American Professional II Stratocaster Neck draws from more than sixty years of innovation, inspiration and evolution to meet the demands of today's working player. Our popular Deep "C" neck now sports smooth rolled fingerboard edges and a "Super-Natural" satin finish that provides a supremely comfortable feel. Other features include a 9.5"-radius maple or rosewood fingerboard, bone nut and 22 narrow-tall frets for easy bending.
The neck pocket has 4 offset pre-drilled pilot holes so if it is being installed on a standard body, a fifth pilot hole will need to be drilled.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
Neck ShapeDeep "C"
-
Tuner Mounting ConfigDual Guide Pin
-
Fingerboard MaterialRosewood
-
Neck MaterialAhorn
-
Nut MaterialKnochen
-
Position InlaysWeißer Dot
-
Neck Finish“Super-Natural” Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
-
Truss Rod Nut1/8" Hex Adjustment
-
Truss RodBi-Flex™
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.685" (42.8 mm)
-
Number of Frets22
-
Fret SizeNarrow Tall
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness1st Fret - .820" (20.82 mm), 12th Fret - .920" (22.86 mm)
-
Peg Hole Diameter.404” (10.26 mm)
Features
- Maple Stratocaster neck with walnut stripe
- 9.5"-radius maple or rosewood fingerboard
- 22 narrow-tall frets; black dot inlays
- Satin urethane "super natural" back finish with gloss headstock
- Pre-slotted bone nut