'70s-style Stratocaster® looks
Fender replacement necks are made at Fender manufacturing facilities to the same specifications as those used on our instruments. Contours, finishes, fret sizes and all other materials are designed and crafted in genuine Fender fashion. U.S.-made necks have detailed frets, satin finishes, hand-rolled fingerboard edges and a "modern C" profile for comfortably smooth playability.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing. For true Fender authenticity, it's also serialized and stamped, and features a '70s-era headstock logo decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
-
StyleModern
-
Neck ShapeModern "C"
-
Tuner Mounting ConfigDual Guide Pin
-
Other FeaturesEach nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing. (Please note: Final string slot filing and nut shaping modification is required to ensure proper fit and performance.)
-
Where UsedAmerican Special Series
-
Fingerboard MaterialMaple
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysBlack Dot
-
Neck FinishSatin Urethane
-
Truss Rod Nut1/8" Hex Adjustment
-
Truss RodStandard
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.6875" (42.86 mm)
-
Number of Frets22
-
Fret SizeJumbo
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
-
Peg Hole Diameter.404” (10.26 mm)
Features
- Maple neck w/ walnut stripe
- Large '70s headstock
- Maple fingerboard with 9.5" radius
- 22 jumbo frets
- Pre-slotted synthetic bone nut
- Micro-Tilt™ neck adjustment
- Six two-guide-pin tuning machine holes
'70s-style Stratocaster® looks
Fender replacement necks are made at Fender manufacturing facilities to the same specifications as those used on our instruments. Contours, finishes, fret sizes and all other materials are designed and crafted in genuine Fender fashion. U.S.-made necks have detailed frets, satin finishes, hand-rolled fingerboard edges and a "modern C" profile for comfortably smooth playability.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing. For true Fender authenticity, it's also serialized and stamped, and features a '70s-era headstock logo decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
-
StyleModern
-
Neck ShapeModern "C"
-
Tuner Mounting ConfigDual Guide Pin
-
Other FeaturesEach nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing. (Please note: Final string slot filing and nut shaping modification is required to ensure proper fit and performance.)
-
Where UsedAmerican Special Series
-
Fingerboard MaterialMaple
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysBlack Dot
-
Neck FinishSatin Urethane
-
Truss Rod Nut1/8" Hex Adjustment
-
Truss RodStandard
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.6875" (42.86 mm)
-
Number of Frets22
-
Fret SizeJumbo
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
-
Peg Hole Diameter.404” (10.26 mm)
Features
- Maple neck w/ walnut stripe
- Large '70s headstock
- Maple fingerboard with 9.5" radius
- 22 jumbo frets
- Pre-slotted synthetic bone nut
- Micro-Tilt™ neck adjustment
- Six two-guide-pin tuning machine holes
Recommended Gear
Locate a Fender Authorized Dealer
Buy Online
Please wait while we search for any available online dealers.
All online dealers listed here will have the specified product in stock, ready for purchase.
Please check back later or close this window and click the "NOTIFY ME WHEN AVAILABLE" button to receive an email when this item is back in stock.
### found within 75 miles of AREA
Request Dealer for Contact
Thank You for Contacting Dealer
Update Location
