Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Vintera® II
Telecaster® neck features an early-'60s "C" shape neck based on a classic '60s profile for an intuitive and inviting feel. A 7.25" radius fingerboard with vintage-tall frets provides vintage comfort with ample room for big bends and expressive vibrato.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a gloss urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine Fender headstock decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
Neck ShapeEarly '60s "C"
-
Tuner Mounting ConfigVintage-Style 2-Screw
-
Fingerboard MaterialRosewood
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysWhite Dot
-
Neck FinishGloss Urethane
-
Truss Rod NutVintage-Style Slotted
-
Truss RodVintage-Style Heel Adjust
-
Fingerboard Radius7.25" (184.1 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.650" (42 mm)
-
Number of Frets21
-
Fret SizeVintage Tall
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .830" (21.08 mm), 12th Fret - 1.00" (25.40 mm)
-
Peg Hole Diameter.358” (9.09 mm)
Features
- Maple neck with early-'60s "C" shape
- Rosewood fingerboard with 7.25" radius
- 21 vintage tall frets; pre-slotted synthetic bone nut
- Vintage-style truss rod
- Six tuning machine holes designed to fit vintage-style two-screw-mount tuning machines
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Vintera® II
Telecaster® neck features an early-'60s "C" shape neck based on a classic '60s profile for an intuitive and inviting feel. A 7.25" radius fingerboard with vintage-tall frets provides vintage comfort with ample room for big bends and expressive vibrato.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a gloss urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine Fender headstock decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
Neck ShapeEarly '60s "C"
-
Tuner Mounting ConfigVintage-Style 2-Screw
-
Fingerboard MaterialRosewood
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysWhite Dot
-
Neck FinishGloss Urethane
-
Truss Rod NutVintage-Style Slotted
-
Truss RodVintage-Style Heel Adjust
-
Fingerboard Radius7.25" (184.1 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.650" (42 mm)
-
Number of Frets21
-
Fret SizeVintage Tall
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .830" (21.08 mm), 12th Fret - 1.00" (25.40 mm)
-
Peg Hole Diameter.358” (9.09 mm)
Features
- Maple neck with early-'60s "C" shape
- Rosewood fingerboard with 7.25" radius
- 21 vintage tall frets; pre-slotted synthetic bone nut
- Vintage-style truss rod
- Six tuning machine holes designed to fit vintage-style two-screw-mount tuning machines
You May Also Like
Recently Viewed
Locate a Fender Authorized Dealer
Buy Online
Please wait while we search for any available online dealers.
All online dealers listed here will have the specified product in stock, ready for purchase.
Please check back later or close this window and click the "NOTIFY ME WHEN AVAILABLE" button to receive an email when this item is back in stock.