The Tone Master FR-12 is a full range, flat response powered speaker designed for use with today's digital guitar amp modelers and profilers. Tone Master FR-12 delivers clear and accurate sound reproduction and perfectly replicates every detail of the amp and effect models. They're the ultimate companion to Tone Master Pro and the ideal solution for players who use modelers at home or on stage.
The Tone Master FR-12 features an integrated 1,000-watt power amp that delivers the volume and headroom needed for even the most demanding live performance. The 3-band active EQ and high frequency cut control allow players to fine tune their stage tone without altering the line output signal. Plus, the design of the FR series was inspired by classic Fender amplifiers for an authentic backline look and feel.
-
ControlsVolume, Treble, Middle, Bass, Cut
-
ChannelsOne
-
InputsOne (1) Balanced 1/4" - XLR Combination
-
Voltage230V EUR
-
Voltage Requirements100-240 VAC, 50-60 Hz
-
Line OutOne - XLR with Ground Lift
-
Output Power1000 Watts
-
Cabinet MaterialLightweight Plywood
-
Amplifier CoveringBlack Textured Vinyl
-
Grille ClothSilver-Strand
-
Amplifier JewelRed Jewel
-
HandleMolded Plastic Strap with Nickel-Plated Caps
-
Legal NoticeWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
-
ColorBlack
-
Maximum Output Level130 dB
-
SpeakersOne - 12" Special Design "CS"
-
Speaker TypeAktiv, 2-Wege
-
Total ImpedanceN/A - Active Speaker
-
Frequency Response70Hz – 20kHz (-3dB)
-
HF Transducers1” Compression
-
LF Transducers12" Special Design
-
Included AccessoriesIEC Power Cable, Owners Manual
-
Recommended CoverP/N: 0050696000, Hot Rod Deluxe™/Blues Deluxe™, FR-12, Black
-
FootswitchNA
-
Height18.13" (46.05 cm)
-
Width23.5" (59.7 cm)
-
Depth9.88" (25.1 cm)
-
Weight27.6 lbs. (12.5 kg)
Features
- 1,000 Watt Class-D Power Amp
- 12" Special Design Speaker
- 1" Wide Dispersion High Frequency Driver
- 3-Band Active EQ with High Frequency Cut Control
- Integrated Tilt Back Legs
- Lightweight Plywood Enclosure
- Authentic Fender Amplifier Industrial Design
The Tone Master FR-12 is a full range, flat response powered speaker designed for use with today's digital guitar amp modelers and profilers. Tone Master FR-12 delivers clear and accurate sound reproduction and perfectly replicates every detail of the amp and effect models. They're the ultimate companion to Tone Master Pro and the ideal solution for players who use modelers at home or on stage.
The Tone Master FR-12 features an integrated 1,000-watt power amp that delivers the volume and headroom needed for even the most demanding live performance. The 3-band active EQ and high frequency cut control allow players to fine tune their stage tone without altering the line output signal. Plus, the design of the FR series was inspired by classic Fender amplifiers for an authentic backline look and feel.
-
ControlsVolume, Treble, Middle, Bass, Cut
-
ChannelsOne
-
InputsOne (1) Balanced 1/4" - XLR Combination
-
Voltage230V EUR
-
Voltage Requirements100-240 VAC, 50-60 Hz
-
Line OutOne - XLR with Ground Lift
-
Output Power1000 Watts
-
Cabinet MaterialLightweight Plywood
-
Amplifier CoveringBlack Textured Vinyl
-
Grille ClothSilver-Strand
-
Amplifier JewelRed Jewel
-
HandleMolded Plastic Strap with Nickel-Plated Caps
-
Legal NoticeWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
-
ColorBlack
-
Maximum Output Level130 dB
-
SpeakersOne - 12" Special Design "CS"
-
Speaker TypeAktiv, 2-Wege
-
Total ImpedanceN/A - Active Speaker
-
Frequency Response70Hz – 20kHz (-3dB)
-
HF Transducers1” Compression
-
LF Transducers12" Special Design
-
Included AccessoriesIEC Power Cable, Owners Manual
-
Recommended CoverP/N: 0050696000, Hot Rod Deluxe™/Blues Deluxe™, FR-12, Black
-
FootswitchNA
-
Height18.13" (46.05 cm)
-
Width23.5" (59.7 cm)
-
Depth9.88" (25.1 cm)
-
Weight27.6 lbs. (12.5 kg)
Features
- 1,000 Watt Class-D Power Amp
- 12" Special Design Speaker
- 1" Wide Dispersion High Frequency Driver
- 3-Band Active EQ with High Frequency Cut Control
- Integrated Tilt Back Legs
- Lightweight Plywood Enclosure
- Authentic Fender Amplifier Industrial Design
Highlights
CLASS D POWER AMPLIFIER
Integrated 1,000-watt power amp delivers maximum power without distortion even at high volume levels.
SPECIAL DESIGN 12” WOOFER AND 1” HIGH FREQUENCY DRIVER
The high-power Fender Special Design speakers are tuned to perfectly reproduce your modeler’s impulse response and speaker cab models.
3-BAND ACTIVE EQ AND CUT CONTROL
Fine tune the speaker to different rooms and stages.
LIGHTWEIGHT PLYWOOD ENCLOSURE
At just 28 lbs., the Tone Master FR-12 is extremely light and portable for easy transport to any gig.
INTEGRATED TILT BACK LEGS
Brings the sound to you and maintains an on-axis response even on the smallest stages.
CLASSIC FENDER DESIGN
The design of the FR-12 was inspired by classic Fender amplifiers for an authentic backline look and feel.
Recommended Gear
Recommended Gear
Recently Viewed
Locate a Fender Authorized Dealer
Buy Online
Please wait while we search for any available online dealers.
All online dealers listed here will have the specified product in stock, ready for purchase.
Please check back later or close this window and click the "NOTIFY ME WHEN AVAILABLE" button to receive an email when this item is back in stock.
### found within 75 miles of AREA
Request Dealer for Contact
Thank You for Contacting Dealer
Update Location
