Fusing Fender's traditional aesthetics with sophisticated Japanese craftsmanship the made in Japan Traditional II series necks offer the sought after and iconic feel of Fender MIJ instruments.
Crafted in the same facility as the Made in Japan series instruments, the Traditional II 60’s Telecaster Neck features a classic “U” shape and incorporates a flatter 9.5" radius and vintage frets on a rosewood fingerboard. A gloss urethane finish provides classic feel and a slimmer 1-5/8" (41 mm) nut width makes for easy playability.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
-
Neck Shape"U" Shape
-
Tuner Mounting ConfigVintage-Style 2-Screw
-
Fingerboard MaterialRosewood
-
Neck MaterialMaple with Walnut Stripe
-
Nut MaterialBone
-
Position InlaysWhite Dot
-
Neck FinishGloss Urethane
-
Truss Rod NutVintage-Style Slotted
-
Truss RodVintage-Style Heel Adjust
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.615" (41.02 mm)
-
Number of Frets21
-
Fret SizeVintage
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .846” (21.5 mm), 12th Fret - .905” (23.0 mm)
Features
- Telecaster neck with walnut stripe
- 9.5"-radius and “U” shape neck profile
- Rosewood fingerboard with 21 vintage frets and white dot inlays
- Gloss urethane finish
- Pre-slotted bone nut
Fusing Fender's traditional aesthetics with sophisticated Japanese craftsmanship the made in Japan Traditional II series necks offer the sought after and iconic feel of Fender MIJ instruments.
Crafted in the same facility as the Made in Japan series instruments, the Traditional II 60’s Telecaster Neck features a classic “U” shape and incorporates a flatter 9.5" radius and vintage frets on a rosewood fingerboard. A gloss urethane finish provides classic feel and a slimmer 1-5/8" (41 mm) nut width makes for easy playability.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
-
Neck Shape"U" Shape
-
Tuner Mounting ConfigVintage-Style 2-Screw
-
Fingerboard MaterialRosewood
-
Neck MaterialMaple with Walnut Stripe
-
Nut MaterialBone
-
Position InlaysWhite Dot
-
Neck FinishGloss Urethane
-
Truss Rod NutVintage-Style Slotted
-
Truss RodVintage-Style Heel Adjust
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.615" (41.02 mm)
-
Number of Frets21
-
Fret SizeVintage
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .846” (21.5 mm), 12th Fret - .905” (23.0 mm)
Features
- Telecaster neck with walnut stripe
- 9.5"-radius and “U” shape neck profile
- Rosewood fingerboard with 21 vintage frets and white dot inlays
- Gloss urethane finish
- Pre-slotted bone nut
You May Also Like
Recently Viewed
Locate a Fender Authorized Dealer
Buy Online
Please wait while we search for any available online dealers.
All online dealers listed here will have the specified product in stock, ready for purchase.
Please check back later or close this window and click the "NOTIFY ME WHEN AVAILABLE" button to receive an email when this item is back in stock.