Crafted at our Ensenada, Mexico manufacturing facility, this genuine vintage-style 3-bolt Fender Telecaster® Deluxe guitar neck features a comfortable vintage "C"-shaped profile and 12"-radius maple fingerboard with 21 medium jumbo frets.
Although this neck features a 3-bolt design typical of '70s Teles, only the bottom two neck mounting pilot holes are available, giving you the flexibility to use this neck with many different guitar bodies.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
Neck Shape"C" Shape
-
Tuner Mounting ConfigVintage-Style 2-Screw
-
Where UsedClassic Series
-
Fingerboard MaterialMaple
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysBlack Dot
-
Neck FinishGloss Urethane
-
Truss Rod NutBullet Style
-
Truss RodBullet Style
-
Fingerboard Radius12" (305 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.650" (42 mm)
-
Number of Frets21
-
Fret SizeMedium Jumbo
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .820" (20.82 mm), 12th Fret - .900" (22.86 mm)
-
Peg Hole Diameter.397" (10.08 mm)
Features
- Maple fingerboard with 12" radius
- Vintage "C"-shaped neck profile
- 21 medium jumbo frets
- Pre-slotted synthetic bone nut
- Gloss urethane finish
- Bullet-style truss rod adjustment
Crafted at our Ensenada, Mexico manufacturing facility, this genuine vintage-style 3-bolt Fender Telecaster® Deluxe guitar neck features a comfortable vintage "C"-shaped profile and 12"-radius maple fingerboard with 21 medium jumbo frets.
Although this neck features a 3-bolt design typical of '70s Teles, only the bottom two neck mounting pilot holes are available, giving you the flexibility to use this neck with many different guitar bodies.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
Neck Shape"C" Shape
-
Tuner Mounting ConfigVintage-Style 2-Screw
-
Where UsedClassic Series
-
Fingerboard MaterialMaple
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysBlack Dot
-
Neck FinishGloss Urethane
-
Truss Rod NutBullet Style
-
Truss RodBullet Style
-
Fingerboard Radius12" (305 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.650" (42 mm)
-
Number of Frets21
-
Fret SizeMedium Jumbo
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .820" (20.82 mm), 12th Fret - .900" (22.86 mm)
-
Peg Hole Diameter.397" (10.08 mm)
Features
- Maple fingerboard with 12" radius
- Vintage "C"-shaped neck profile
- 21 medium jumbo frets
- Pre-slotted synthetic bone nut
- Gloss urethane finish
- Bullet-style truss rod adjustment
You May Also Like
Recently Viewed
Locate a Fender Authorized Dealer
Buy Online
Please wait while we search for any available online dealers.
All online dealers listed here will have the specified product in stock, ready for purchase.
Please check back later or close this window and click the "NOTIFY ME WHEN AVAILABLE" button to receive an email when this item is back in stock.