The Acoustasonic™ 40 amplifier offers portable amplification for acoustic-electric guitar and microphone. It's a simple, flexible "grab and go" solution for a variety of musical performance and basic public address applications, and it can also be used as an onstage monitor when combined with a PA system.
-
ControlsChannel 1: Volume, Bass, Mid, Treble, Reverb; Channel 2: Volume, Bass, Mid, Treble, Reverb
-
ChannelsTwo
-
InputsTwo - (XLR / 1/4" combined)
-
EffectsReverb
-
Voltage230V EUR
-
Voltage Requirements100-240 VAC, 50-60 Hz
-
Wattage40 Watts
-
Line OutOne - XLR with Ground Lift
-
Cabinet Material5-Ply 5/8" Lightweight Plywood
-
Amplifier CoveringBrown Textured Vinyl
-
Grille ClothBlack
-
Amplifier JewelRed LED
-
HandleMolded Plastic Strap with Nickel-Plated Caps
-
Legal NoticeWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
-
ColorBrown and Wheat
-
SpeakersTwo - 6.5" Special Design Full-Range with Whizzer Cones
-
Total Impedance8 ohms
-
Preamp TubesNA
-
Power TubesNA
-
RectifierNA
-
FootswitchNA
-
Height11.625" (29.5 cm)
-
Width15" (38 cm)
-
Depth7.125" 18.09 cm)
-
Weight16.5 lbs (7.5 kg)
- Acoustasonic™ 40 Owner's Manual
- Fender®-Squier® Brands Amplifier 2-Year Limited Warranty
- Owner's Manual - Bulgarian
- Owner's Manual - Croatian
- Owner's Manual - Dutch
- Owner's Manual - Estonian
- Owner's Manual - Finnish
- Owner's Manual - Greek
- Owner's Manual - Latvian
- Owner's Manual - Lithuanian
- Owner's Manual - Romanian
- Owner's Manual - Swedish
Features
- Two - 6" Speaker with "Whizzer" Cone
- Built in Reverb
- XLR and 1/4" inputs
The Acoustasonic™ 40 amplifier offers portable amplification for acoustic-electric guitar and microphone. It's a simple, flexible "grab and go" solution for a variety of musical performance and basic public address applications, and it can also be used as an onstage monitor when combined with a PA system.
-
ControlsChannel 1: Volume, Bass, Mid, Treble, Reverb; Channel 2: Volume, Bass, Mid, Treble, Reverb
-
ChannelsTwo
-
InputsTwo - (XLR / 1/4" combined)
-
EffectsReverb
-
Voltage230V EUR
-
Voltage Requirements100-240 VAC, 50-60 Hz
-
Wattage40 Watts
-
Line OutOne - XLR with Ground Lift
-
Cabinet Material5-Ply 5/8" Lightweight Plywood
-
Amplifier CoveringBrown Textured Vinyl
-
Grille ClothBlack
-
Amplifier JewelRed LED
-
HandleMolded Plastic Strap with Nickel-Plated Caps
-
Legal NoticeWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
-
ColorBrown and Wheat
-
SpeakersTwo - 6.5" Special Design Full-Range with Whizzer Cones
-
Total Impedance8 ohms
-
Preamp TubesNA
-
Power TubesNA
-
RectifierNA
-
FootswitchNA
-
Height11.625" (29.5 cm)
-
Width15" (38 cm)
-
Depth7.125" 18.09 cm)
-
Weight16.5 lbs (7.5 kg)
- Acoustasonic™ 40 Owner's Manual
- Fender®-Squier® Brands Amplifier 2-Year Limited Warranty
- Owner's Manual - Bulgarian
- Owner's Manual - Croatian
- Owner's Manual - Dutch
- Owner's Manual - Estonian
- Owner's Manual - Finnish
- Owner's Manual - Greek
- Owner's Manual - Latvian
- Owner's Manual - Lithuanian
- Owner's Manual - Romanian
- Owner's Manual - Swedish
Features
- Two - 6" Speaker with "Whizzer" Cone
- Built in Reverb
- XLR and 1/4" inputs
Highlights
6” Speaker with “Whizzer” Cone
For more effective high-frequency response, the Acoustasonic 40 bears the unusual distinction of being the only Fender guitar amp to use a “whizzer” cone—a small supplementary speaker cone attached to the voice coil of the amps 6” speaker.
Built-In Reverb
For extra ambience, the Acoustasonic 40’s instrument channel features built-in reverb.
XLR and ¼” Inputs
The Acoustasonic 40’s convenient dual front-panel inputs include a standard ¼” jack for an instrument and an XLR input for a microphone.
