Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
StyleVintage-Style
-
Neck Shape'70s "C"
-
Tuner Mounting ConfigVintage-Style 4-Screw
-
Other FeaturesEach nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing. (Please note: Final string slot filing and nut shaping modification is required to ensure proper fit and performance.)
-
Where UsedClassic Series
-
Fingerboard MaterialPau Ferro
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysPearloid Block
-
Neck FinishGloss Urethane
-
Truss Rod NutBullet Style
-
Truss RodStandard
-
Fingerboard Radius7.25" (184.1 mm)
-
Scale Length34" (86.36 cm)
-
Nut Width1.5" (38.1 mm)
-
Number of Frets20
-
Fret SizeVintage-Style
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness2nd Fret - .820" (20.82 mm), 12th Fret - .920" (23.36 mm)
-
Peg Hole Diameter.625” (15.87 mm)
Features
- 7.25"-radius pau ferro fingerboard
- "C"-shaped neck profile
- 20 medium-jumbo frets; block inlays
- Pre-slotted synthetic bone nut
- Gloss urethane finish
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
StyleVintage-Style
-
Neck Shape'70s "C"
-
Tuner Mounting ConfigVintage-Style 4-Screw
-
Other FeaturesEach nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing. (Please note: Final string slot filing and nut shaping modification is required to ensure proper fit and performance.)
-
Where UsedClassic Series
-
Fingerboard MaterialPau Ferro
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysPearloid Block
-
Neck FinishGloss Urethane
-
Truss Rod NutBullet Style
-
Truss RodStandard
-
Fingerboard Radius7.25" (184.1 mm)
-
Scale Length34" (86.36 cm)
-
Nut Width1.5" (38.1 mm)
-
Number of Frets20
-
Fret SizeVintage-Style
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness2nd Fret - .820" (20.82 mm), 12th Fret - .920" (23.36 mm)
-
Peg Hole Diameter.625” (15.87 mm)
Features
- 7.25"-radius pau ferro fingerboard
- "C"-shaped neck profile
- 20 medium-jumbo frets; block inlays
- Pre-slotted synthetic bone nut
- Gloss urethane finish