In a bold Fender first, the Tone Master Twin Reverb Blonde amplifier uses massive digital processing power to achieve a single remarkable sonic feat: faithfully modeling the circuitry and 85-watt power output of an original Twin tube amp. A high-performance 200-watt digital power amp is used to achieve the headroom and dynamic range of a real vintage Twin tube amp. The resonant pine cabinet is paired with two Celestion® NEO Creamback speakers for a more distinctive rock 'n' roll flavor. The result is tubeless Twin Reverb tone, volume and dynamics virtually indistinguishable from the all-tube original. The reverb control has been modified to provide easier fine tuning at lower settings. Perhaps most notably, even with all these features and more, the Tone Master Twin Reverb is in fact about only half the weight of an all-tube Twin.
The blonde vinyl covering elegantly evokes classic early-'60s Fender vibe, and front panel features give guitarists a playing experience identical to the tube version, including Fender's world-standard reverb and tremolo effects. Additional rear-panel features deliver modern convenience and flexibility - including an output power selector for full power and five attenuated settings, balanced XLR line output with impulse response (IR) cabinet simulations captured with Shure SM57 and Sennheiser MD421 microphones, mute switch for silent stage or recording use, USB port for firmware upgrades, and more.
-
Recommended CoverP/N: 0050250000, '65 Twin Reverb®, Black (Included)
-
Footswitch2-Button Footswitch Included
-
ChannelsTwo - (Normal and Vibrato)
-
InputsFour - (1/4", Two Normal and Two Vibrato)
-
EffectsReverb, Tremolo
-
Voltage120V
-
Voltage Requirements100-240 VAC, 50-60 Hz
-
Wattage200W into 4Ω (Simulates 85W Tube Amp Performance)
-
Line OutOne - (Balanced XLR with Ground Lift and Level Control)
-
ConnectivityUSB For Firmware Updates
-
Cabinet MaterialLightweight Solid Pine
-
Amplifier CoveringBlonde Textured Vinyl
-
Grille ClothOxblood
-
Amplifier JewelRed (Power), Red/Amber (Warmup), Amber (Mute)
-
Front PanelBlack
-
HandleMolded Plastic Strap with Nickel-Plated Caps
-
Legal NoticeWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
-
ColorBlonde
-
SpeakersTwo - 12" Celestion® NEO Creamback
-
Total Impedance4 ohms
-
Height20.24" (51.41 cm)
-
Width26.15" (66.4 cm)
-
Depth10.375" (263.52 mm)
-
Weight33 lbs (15 kg)
Features
- Two Celestion® Neo Creamback speakers
- Normal and Vibrato channels, each with two inputs and Bright switches
- Rear-panel output power selector for full power and five attenuated settings
- Balanced XLR line output with two impulse response (IR) cabinet simulations, level control, and ground switch
- Lightweight, resonant pine cabinet
- Power jewel illuminates in different colors for normal operation, warmup, and mute/silent mode
- USB port for firmware upgrades
- Universal worldwide 100V - 240V operation
- Cover and two-button footswitch included
Click here to download latest Firmware updates.
In a bold Fender first, the Tone Master Twin Reverb Blonde amplifier uses massive digital processing power to achieve a single remarkable sonic feat: faithfully modeling the circuitry and 85-watt power output of an original Twin tube amp. A high-performance 200-watt digital power amp is used to achieve the headroom and dynamic range of a real vintage Twin tube amp. The resonant pine cabinet is paired with two Celestion® NEO Creamback speakers for a more distinctive rock 'n' roll flavor. The result is tubeless Twin Reverb tone, volume and dynamics virtually indistinguishable from the all-tube original. The reverb control has been modified to provide easier fine tuning at lower settings. Perhaps most notably, even with all these features and more, the Tone Master Twin Reverb is in fact about only half the weight of an all-tube Twin.
The blonde vinyl covering elegantly evokes classic early-'60s Fender vibe, and front panel features give guitarists a playing experience identical to the tube version, including Fender's world-standard reverb and tremolo effects. Additional rear-panel features deliver modern convenience and flexibility - including an output power selector for full power and five attenuated settings, balanced XLR line output with impulse response (IR) cabinet simulations captured with Shure SM57 and Sennheiser MD421 microphones, mute switch for silent stage or recording use, USB port for firmware upgrades, and more.
-
Recommended CoverP/N: 0050250000, '65 Twin Reverb®, Black (Included)
-
Footswitch2-Button Footswitch Included
-
ChannelsTwo - (Normal and Vibrato)
-
InputsFour - (1/4", Two Normal and Two Vibrato)
-
EffectsReverb, Tremolo
-
Voltage120V
-
Voltage Requirements100-240 VAC, 50-60 Hz
-
Wattage200W into 4Ω (Simulates 85W Tube Amp Performance)
-
Line OutOne - (Balanced XLR with Ground Lift and Level Control)
-
ConnectivityUSB For Firmware Updates
-
Cabinet MaterialLightweight Solid Pine
-
Amplifier CoveringBlonde Textured Vinyl
-
Grille ClothOxblood
-
Amplifier JewelRed (Power), Red/Amber (Warmup), Amber (Mute)
-
Front PanelBlack
-
HandleMolded Plastic Strap with Nickel-Plated Caps
-
Legal NoticeWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
-
ColorBlonde
-
SpeakersTwo - 12" Celestion® NEO Creamback
-
Total Impedance4 ohms
-
Height20.24" (51.41 cm)
-
Width26.15" (66.4 cm)
-
Depth10.375" (263.52 mm)
-
Weight33 lbs (15 kg)
Features
- Two Celestion® Neo Creamback speakers
- Normal and Vibrato channels, each with two inputs and Bright switches
- Rear-panel output power selector for full power and five attenuated settings
- Balanced XLR line output with two impulse response (IR) cabinet simulations, level control, and ground switch
- Lightweight, resonant pine cabinet
- Power jewel illuminates in different colors for normal operation, warmup, and mute/silent mode
- USB port for firmware upgrades
- Universal worldwide 100V - 240V operation
- Cover and two-button footswitch included
Click here to download latest Firmware updates.