Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Jazz Bass® left-handed guitar neck features a comfortable "modern C" profile and 9.5"-radius maple or pau ferro fingerboard with 20 medium jumbo frets.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with a genuine spaghetti logo headstock decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
Neck ShapeModern "C"
-
Tuner Mounting Config4-Screw
-
Fingerboard MaterialMaple
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysBlack Dot
-
Neck FinishSatin Urethane Finish on Back, Gloss Urethane Finish on Front
-
Truss Rod Nut3/16" Hex Adjustment
-
Truss RodStandard
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length34" (86.36 cm)
-
Nut Width1.5" (38.1 mm)
-
Number of Frets20
-
Fret SizeMedium Jumbo
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness1st Fret - .800" (20.32 mm), 12th Fret - .900" (22.86 mm)
-
Peg Hole Diameter.734” (18.64 mm)
Features
- Maple neck with walnut "skunk" stripe
- Maple or pau ferro fingerboard with 9.5" radius
- 20 medium jumbo frets
- Pre-slotted synthetic bone nut
- Standard truss rod
- Four pre-drilled tuning machine holes
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Jazz Bass® left-handed guitar neck features a comfortable "modern C" profile and 9.5"-radius maple or pau ferro fingerboard with 20 medium jumbo frets.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with a genuine spaghetti logo headstock decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
Neck ShapeModern "C"
-
Tuner Mounting Config4-Screw
-
Fingerboard MaterialMaple
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysBlack Dot
-
Neck FinishSatin Urethane Finish on Back, Gloss Urethane Finish on Front
-
Truss Rod Nut3/16" Hex Adjustment
-
Truss RodStandard
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length34" (86.36 cm)
-
Nut Width1.5" (38.1 mm)
-
Number of Frets20
-
Fret SizeMedium Jumbo
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness1st Fret - .800" (20.32 mm), 12th Fret - .900" (22.86 mm)
-
Peg Hole Diameter.734” (18.64 mm)
Features
- Maple neck with walnut "skunk" stripe
- Maple or pau ferro fingerboard with 9.5" radius
- 20 medium jumbo frets
- Pre-slotted synthetic bone nut
- Standard truss rod
- Four pre-drilled tuning machine holes
