Each year, the Fender factory finds itself with a small selection of fine instrument necks crafted for a variety of Fender guitar and bass models. These necks are prized finds in and of themselves, and now they’re available to you in a special limited run. Due to the nature of the wood, no two necks will be alike and the degree of figuring will vary.
Crafted in the same facility as our U.S.-made instruments, the American Professional TelecasterNeck is well-suited to any playing style and features a figured maple neck. Designed for speed and comfort, this neck sports our innovative "Deep C" neck profile, which, thanks to its increased mass and altered geometry, offers a natural fret-hand feel. Other features include a 9.5"-radius rosewood fingerboard, 22 narrow-tall frets, bone nut and a satin urethane finish on the back.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
-
Neck ShapeDeep "C"
-
Tuner Mounting ConfigDual Guide Pin
-
Fingerboard MaterialRosewood
-
Neck MaterialFigured Maple
-
Nut MaterialBone
-
Position InlaysWhite Dot
-
Neck FinishSatin Urethane with Gloss Urethane Headstock Face
-
Truss Rod Nut1/8" Hex Adjustment
-
Truss RodBi-Flex™
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.685" (42.8 mm)
-
Number of Frets22
-
Fret SizeNarrow Tall
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .820" (20.82 mm), 12th Fret - .920" (22.86 mm)
-
Peg Hole Diameter.404” (10.26 mm)
Features
- Figured Maple Telecaster neck with walnut stripe
- 9.5"-radius rosewood fingerboard
- 22 narrow-tall frets; white dot inlays
- Satin urethane back finish with gloss headstock
- Pre-slotted bone nut
Each year, the Fender factory finds itself with a small selection of fine instrument necks crafted for a variety of Fender guitar and bass models. These necks are prized finds in and of themselves, and now they’re available to you in a special limited run. Due to the nature of the wood, no two necks will be alike and the degree of figuring will vary.
Crafted in the same facility as our U.S.-made instruments, the American Professional TelecasterNeck is well-suited to any playing style and features a figured maple neck. Designed for speed and comfort, this neck sports our innovative "Deep C" neck profile, which, thanks to its increased mass and altered geometry, offers a natural fret-hand feel. Other features include a 9.5"-radius rosewood fingerboard, 22 narrow-tall frets, bone nut and a satin urethane finish on the back.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
-
Neck ShapeDeep "C"
-
Tuner Mounting ConfigDual Guide Pin
-
Fingerboard MaterialRosewood
-
Neck MaterialFigured Maple
-
Nut MaterialBone
-
Position InlaysWhite Dot
-
Neck FinishSatin Urethane with Gloss Urethane Headstock Face
-
Truss Rod Nut1/8" Hex Adjustment
-
Truss RodBi-Flex™
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.685" (42.8 mm)
-
Number of Frets22
-
Fret SizeNarrow Tall
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .820" (20.82 mm), 12th Fret - .920" (22.86 mm)
-
Peg Hole Diameter.404” (10.26 mm)
Features
- Figured Maple Telecaster neck with walnut stripe
- 9.5"-radius rosewood fingerboard
- 22 narrow-tall frets; white dot inlays
- Satin urethane back finish with gloss headstock
- Pre-slotted bone nut
Locate a Fender Authorized Dealer
Buy Online
Please wait while we search for any available online dealers.
All online dealers listed here will have the specified product in stock, ready for purchase.
Please check back later or close this window and click the "NOTIFY ME WHEN AVAILABLE" button to receive an email when this item is back in stock.