70s-style Precision Bass® looks
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine vintage-style Fender Precision Bass® guitar maple neck features a comfortable '70s "C" profile and 7.25"-radius maple fingerboard with 20 vintage-style frets.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a gloss urethane finish on the back offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine '70s logo headstock decal.
This replacement neck is for a Fender or Squier® by Fender bass.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
StyleVintage-Style
-
Neck ShapeVintage "C"
-
Tuner Mounting ConfigVintage-Style 4-Screw
-
Other FeaturesEach nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing. (Please note: Final string slot filing and nut shaping modification is required to ensure proper fit and performance.)
-
Where UsedClassic Series
-
Fingerboard MaterialMaple
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysBlack Block
-
Neck FinishGloss Urethane
-
Truss Rod NutVintage-Style Slotted
-
Truss RodVintage-Style Heel Adjust
-
Fingerboard Radius7.25" (184.1 mm)
-
Scale Length34" (86.36 cm)
-
Nut Width1.625" (41.3 mm)
-
Number of Frets20
-
Fret SizeVintage-Style
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness1st Fret - .820" (20.82 mm), 12th Fret - .920" (23.36 mm)
-
Peg Hole Diameter.625” (15.87 mm)
Features
- Maple neck with walnut "skunk" stripe
- Maple fingerboard with 7.25" radius
- 20 vintage-style frets
- Pre-slotted synthetic bone nut
- Vintage-style truss rod adjustment
- Four tuning machine holes designed to fit vintage-style four-screw-mount tuning machines
Genuine Fender Neck
70s-style Precision Bass® looks
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine vintage-style Fender Precision Bass® guitar maple neck features a comfortable '70s "C" profile and 7.25"-radius maple fingerboard with 20 vintage-style frets.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a gloss urethane finish on the back offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine '70s logo headstock decal.
This replacement neck is for a Fender or Squier® by Fender bass.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
StyleVintage-Style
-
Neck ShapeVintage "C"
-
Tuner Mounting ConfigVintage-Style 4-Screw
-
Other FeaturesEach nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing. (Please note: Final string slot filing and nut shaping modification is required to ensure proper fit and performance.)
-
Where UsedClassic Series
-
Fingerboard MaterialMaple
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysBlack Block
-
Neck FinishGloss Urethane
-
Truss Rod NutVintage-Style Slotted
-
Truss RodVintage-Style Heel Adjust
-
Fingerboard Radius7.25" (184.1 mm)
-
Scale Length34" (86.36 cm)
-
Nut Width1.625" (41.3 mm)
-
Number of Frets20
-
Fret SizeVintage-Style
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness1st Fret - .820" (20.82 mm), 12th Fret - .920" (23.36 mm)
-
Peg Hole Diameter.625” (15.87 mm)
Features
- Maple neck with walnut "skunk" stripe
- Maple fingerboard with 7.25" radius
- 20 vintage-style frets
- Pre-slotted synthetic bone nut
- Vintage-style truss rod adjustment
- Four tuning machine holes designed to fit vintage-style four-screw-mount tuning machines
