There's no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument's voice.
Crafted in the same facility as our U.S.-made instruments, the Limited Edition 1952 Telecaster Neck features the classic 1952 "U" shape and incorporates a flatter radius and taller 6105 frets to keep notes from "choking out". A satin urethane finish and smooth rolled fingerboard edges provides an extremely comfortable feel.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
Neck Shape1952 "U"
-
Tuner Mounting ConfigVintage-Style 2-Screw
-
Fingerboard MaterialRoasted Maple
-
Neck MaterialRoasted Maple
-
Nut MaterialBone
-
Position InlaysBlack Dot
-
Neck FinishSatin Urethane
-
Truss Rod NutVintage-Style Slotted
-
Truss RodVintage-Style Butt Adjust
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.650" (42 mm)
-
Number of Frets21
-
Fret SizeNarrow Tall (6105)
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .880” (22.35 mm), 12th Fret - .990” (25.15 mm)
-
Peg Hole Diameter.358" (9.09 mm)
Features
- 1-piece roasted maple Telecaster neck with walnut stripe
- 9.5"-radius and 1952 "U" shape neck and rolled fingerboard edges
- 21 narrow-tall 6105 frets; black dot inlays
- Satin urethane finish
- Pre-slotted bone nut
There's no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument's voice.
Crafted in the same facility as our U.S.-made instruments, the Limited Edition 1952 Telecaster Neck features the classic 1952 "U" shape and incorporates a flatter radius and taller 6105 frets to keep notes from "choking out". A satin urethane finish and smooth rolled fingerboard edges provides an extremely comfortable feel.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
Neck Shape1952 "U"
-
Tuner Mounting ConfigVintage-Style 2-Screw
-
Fingerboard MaterialRoasted Maple
-
Neck MaterialRoasted Maple
-
Nut MaterialBone
-
Position InlaysBlack Dot
-
Neck FinishSatin Urethane
-
Truss Rod NutVintage-Style Slotted
-
Truss RodVintage-Style Butt Adjust
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.650" (42 mm)
-
Number of Frets21
-
Fret SizeNarrow Tall (6105)
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .880” (22.35 mm), 12th Fret - .990” (25.15 mm)
-
Peg Hole Diameter.358" (9.09 mm)
Features
- 1-piece roasted maple Telecaster neck with walnut stripe
- 9.5"-radius and 1952 "U" shape neck and rolled fingerboard edges
- 21 narrow-tall 6105 frets; black dot inlays
- Satin urethane finish
- Pre-slotted bone nut
You May Also Like
Frequently Bought Together
Recently Viewed
Locate a Fender Authorized Dealer
Buy Online
Please wait while we search for any available online dealers.
All online dealers listed here will have the specified product in stock, ready for purchase.
Please check back later or close this window and click the "NOTIFY ME WHEN AVAILABLE" button to receive an email when this item is back in stock.