Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Vintera® II Stratocaster® neck features a "U" shape based on the classic '70s profile and offers a remarkably comfy feel. A 7.25" radius fingerboard with vintage-tall frets provides vintage comfort with ample room for big bends and expressive vibrato. Although this neck features a 3-bolt design typical of '70s Strats, only the bottom two neck mounting pilot holes are available, giving you the flexibility to use this neck with many different guitar bodies.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a gloss urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
Neck Shape'70s "U"
-
Tuner Mounting Config'70s Vintage-Style 2-Screw
-
Fingerboard MaterialMaple
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysBlack Dot
-
Neck FinishGloss Urethane
-
Truss Rod NutBullet Style
-
Truss RodBullet Style
-
Fingerboard Radius7.25" (184.1 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.650" (42 mm)
-
Number of Frets21
-
Fret SizeVintage Tall
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .835" (21.21 mm), 12th Fret - .900" (22.86 mm)
-
Peg Hole Diameter.397" (10.08 mm)
Features
- Maple neck with ‘70’s “U” Shape
- Maple fingerboard with 7.25" radius
- 21 vintage tall frets
- Pre-slotted synthetic bone nut
- Bullet truss rod
- Six tuning machine holes designed to fit 70’s vintage-style two-screw-mount tuning machines
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Vintera® II Stratocaster® neck features a "U" shape based on the classic '70s profile and offers a remarkably comfy feel. A 7.25" radius fingerboard with vintage-tall frets provides vintage comfort with ample room for big bends and expressive vibrato. Although this neck features a 3-bolt design typical of '70s Strats, only the bottom two neck mounting pilot holes are available, giving you the flexibility to use this neck with many different guitar bodies.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a gloss urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
Neck Shape'70s "U"
-
Tuner Mounting Config'70s Vintage-Style 2-Screw
-
Fingerboard MaterialMaple
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysBlack Dot
-
Neck FinishGloss Urethane
-
Truss Rod NutBullet Style
-
Truss RodBullet Style
-
Fingerboard Radius7.25" (184.1 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.650" (42 mm)
-
Number of Frets21
-
Fret SizeVintage Tall
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .835" (21.21 mm), 12th Fret - .900" (22.86 mm)
-
Peg Hole Diameter.397" (10.08 mm)
Features
- Maple neck with ‘70’s “U” Shape
- Maple fingerboard with 7.25" radius
- 21 vintage tall frets
- Pre-slotted synthetic bone nut
- Bullet truss rod
- Six tuning machine holes designed to fit 70’s vintage-style two-screw-mount tuning machines
You May Also Like
Frequently Bought Together
Recently Viewed
Locate a Fender Authorized Dealer
Buy Online
Please wait while we search for any available online dealers.
All online dealers listed here will have the specified product in stock, ready for purchase.
Please check back later or close this window and click the "NOTIFY ME WHEN AVAILABLE" button to receive an email when this item is back in stock.