Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Baritone Sub-Sonic Telecaster® guitar neck will convert your standard scale length guitar into a 27" scale length baritone! Features a comfortable "modern C" profile and 9.5"-radius pau ferro fingerboard with 22 medium jumbo frets.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a gloss urethane finish on the back offers smooth playability.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
StyleModern
-
Neck ShapeModern "C"
-
Tuner Mounting ConfigDual Guide Pin
-
Fingerboard MaterialPau Ferro
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysWhite Dot
-
Neck FinishGloss Urethane
-
Truss Rod Nut3/16" Hex Adjustment
-
Truss RodStandard
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length27" (686 mm)
-
Nut Width1.650" (42 mm)
-
Number of Frets22
-
Fret SizeMedium Jumbo
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness1st Fret - .830” (21.08 mm), 12th Fret - .900" (22.86 mm)
-
Peg Hole Diameter.397" (10.08 mm)
Features
- Conversion to 27" baritone scale length
- Pau Ferro fingerboard with 9.5" radius
- 22 medium jumbo frets
- Pre-slotted synthetic bone nut
- Standard truss rod
- Six two-guide-pin tuning machine holes
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Baritone Sub-Sonic Telecaster® guitar neck will convert your standard scale length guitar into a 27" scale length baritone! Features a comfortable "modern C" profile and 9.5"-radius pau ferro fingerboard with 22 medium jumbo frets.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a gloss urethane finish on the back offers smooth playability.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
StyleModern
-
Neck ShapeModern "C"
-
Tuner Mounting ConfigDual Guide Pin
-
Fingerboard MaterialPau Ferro
-
Neck MaterialMaple
-
Nut MaterialSynthetic Bone
-
Position InlaysWhite Dot
-
Neck FinishGloss Urethane
-
Truss Rod Nut3/16" Hex Adjustment
-
Truss RodStandard
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length27" (686 mm)
-
Nut Width1.650" (42 mm)
-
Number of Frets22
-
Fret SizeMedium Jumbo
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness1st Fret - .830” (21.08 mm), 12th Fret - .900" (22.86 mm)
-
Peg Hole Diameter.397" (10.08 mm)
Features
- Conversion to 27" baritone scale length
- Pau Ferro fingerboard with 9.5" radius
- 22 medium jumbo frets
- Pre-slotted synthetic bone nut
- Standard truss rod
- Six two-guide-pin tuning machine holes
