Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
StyleVintage-Style
-
Neck Shape'70s "C"
-
Tuner Mounting ConfigVintage-Style 4-Screw
-
Other FeaturesEach nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing. (Please note: Final string slot filing and nut shaping modification is required to ensure proper fit and performance.)
-
Where UsedClassic Series
-
Fingerboard MaterialPau Ferro
-
Neck MaterialArce
-
Nut MaterialHueso sintético de cejuela
-
Position InlaysBloque perlado
-
Neck FinishGloss Urethane
-
Truss Rod NutBullet Style
-
Truss RodStandard
-
Fingerboard Radius7.25" (184.1 mm)
-
Scale Length34" (86.36 cm)
-
Nut Width1.5" (38.1 mm)
-
Number of Frets20
-
Fret SizeVintage-Style
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness2nd Fret - .820" (20.82 mm), 12th Fret - .920" (23.36 mm)
-
Peg Hole Diameter.625” (15.87 mm)
Características
- 7.25"-radius pau ferro fingerboard
- "C"-shaped neck profile
- 20 medium-jumbo frets; block inlays
- Pre-slotted synthetic bone nut
- Gloss urethane finish
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
StyleVintage-Style
-
Neck Shape'70s "C"
-
Tuner Mounting ConfigVintage-Style 4-Screw
-
Other FeaturesEach nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing. (Please note: Final string slot filing and nut shaping modification is required to ensure proper fit and performance.)
-
Where UsedClassic Series
-
Fingerboard MaterialPau Ferro
-
Neck MaterialArce
-
Nut MaterialHueso sintético de cejuela
-
Position InlaysBloque perlado
-
Neck FinishGloss Urethane
-
Truss Rod NutBullet Style
-
Truss RodStandard
-
Fingerboard Radius7.25" (184.1 mm)
-
Scale Length34" (86.36 cm)
-
Nut Width1.5" (38.1 mm)
-
Number of Frets20
-
Fret SizeVintage-Style
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness2nd Fret - .820" (20.82 mm), 12th Fret - .920" (23.36 mm)
-
Peg Hole Diameter.625” (15.87 mm)
Características
- 7.25"-radius pau ferro fingerboard
- "C"-shaped neck profile
- 20 medium-jumbo frets; block inlays
- Pre-slotted synthetic bone nut
- Gloss urethane finish
Equipo recomendado
Visto recientemente
Localizar un vendedor autorizado de Fender
Buy Online
Please wait while we search for any available online dealers.
All online dealers listed here will have the specified product in stock, ready for purchase.
Please check back later or close this window and click the "NOTIFY ME WHEN AVAILABLE" button to receive an email when this item is back in stock.