There's no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument's voice.
This genuine Fender Stratocaster neck is crafted at our Ensenada, Mexico manufacturing facility. Featuring an "early 70's C" neck profile and 9.5"-radius maple fingerboard with 21 medium jumbo frets, for modern playing feel. Although this neck features a 3-bolt design typical of '70s Strats, only the bottom two neck mounting pilot holes are available, giving you the flexibility to use this neck with many different guitar bodies. The synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. The perfect way to give your Strat® authentic Fender feel, this replacement neck even sports the CBS era logo and a Bullet truss rod on the larger headstock.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
StyleModern
-
Neck ShapeEarly '70s "C"
-
Tuner Mounting Config'70s Vintage-Style 2-Screw
-
Fingerboard MaterialRoasted Maple
-
Neck MaterialRoasted Maple
-
Nut MaterialHueso sintético de cejuela
-
Position InlaysPunto negro
-
Neck FinishSatin Urethane Finish on Back, Gloss Urethane Finish on Front
-
Truss Rod NutBullet Style
-
Truss RodBullet Style
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.650" (42 mm)
-
Number of Frets21
-
Fret SizeMedium Jumbo
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness1st Fret - .850" (21.59 mm), 12th Fret - .910" (23.11 mm)
-
Peg Hole Diameter.397" (10.08 mm)
Características
- Roasted maple neck
- "Early 70's C"-shaped profile; 9.5"-radius maple fingerboard
- 21 medium jumbo frets; pre-slotted synthetic bone nut
- Gloss urethane finish on fingerboard and headstock face; satin finish on back of neck
- Bullet-style truss rod adjustment
There's no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument's voice.
This genuine Fender Stratocaster neck is crafted at our Ensenada, Mexico manufacturing facility. Featuring an "early 70's C" neck profile and 9.5"-radius maple fingerboard with 21 medium jumbo frets, for modern playing feel. Although this neck features a 3-bolt design typical of '70s Strats, only the bottom two neck mounting pilot holes are available, giving you the flexibility to use this neck with many different guitar bodies. The synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. The perfect way to give your Strat® authentic Fender feel, this replacement neck even sports the CBS era logo and a Bullet truss rod on the larger headstock.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
StyleModern
-
Neck ShapeEarly '70s "C"
-
Tuner Mounting Config'70s Vintage-Style 2-Screw
-
Fingerboard MaterialRoasted Maple
-
Neck MaterialRoasted Maple
-
Nut MaterialHueso sintético de cejuela
-
Position InlaysPunto negro
-
Neck FinishSatin Urethane Finish on Back, Gloss Urethane Finish on Front
-
Truss Rod NutBullet Style
-
Truss RodBullet Style
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.650" (42 mm)
-
Number of Frets21
-
Fret SizeMedium Jumbo
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness1st Fret - .850" (21.59 mm), 12th Fret - .910" (23.11 mm)
-
Peg Hole Diameter.397" (10.08 mm)
Características
- Roasted maple neck
- "Early 70's C"-shaped profile; 9.5"-radius maple fingerboard
- 21 medium jumbo frets; pre-slotted synthetic bone nut
- Gloss urethane finish on fingerboard and headstock face; satin finish on back of neck
- Bullet-style truss rod adjustment
Equipo recomendado
Visto recientemente
Localizar un vendedor autorizado de Fender
Buy Online
Please wait while we search for any available online dealers.
All online dealers listed here will have the specified product in stock, ready for purchase.
Please check back later or close this window and click the "NOTIFY ME WHEN AVAILABLE" button to receive an email when this item is back in stock.