Add a touch of style to your guitar with a Player Series neck featuring block inlays. For modern playability with a throwback vibe, these necks have all the features of the Players Series instruments but with block inlays that make them stand out in a crowd.
Fender replacement necks are made at Fender manufacturing facilities to the same specifications as those used on our instruments. This Ensenada, Mexico-made Telecaster neck features a pau ferro fingerboard with white pearloid block inlays, a 9.5" radius and 22 medium jumbo frets. The maple neck has a comfortable Modern C neck profile that is comfortable for almost any playing style.
The synthetic bone nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing. For true Fender authenticity, it's also serialized and stamped, with genuine headstock spaghetti logo decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
StyleModern
-
Neck ShapeModern "C"
-
Tuner Mounting ConfigDual Guide Pin
-
Fingerboard MaterialPau Ferro
-
Neck MaterialMaple with Walnut Stripe
-
Nut MaterialSillet en os synthétique
-
Position InlaysRectangles blancs en perloïde
-
Neck FinishSatin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
-
Truss Rod Nut3/16" Hex Adjustment
-
Truss RodSingle Action, Head Adjust
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.650" (42 mm)
-
Number of Frets22
-
Fret SizeMedium Jumbo
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
-
Peg Hole Diameter.397" (10.08 mm)
Caractéristiques
- Maple fingerboard with white pearloid block inlays
- 9.5" radius with 22 medium jumbo frets
- Modern C neck profile
- Satin urethane finish on back, gloss urethane on headstock face
- Pre-slotted synthetic bone nut
- Six two-guide-pin tuning machine holes
Add a touch of style to your guitar with a Player Series neck featuring block inlays. For modern playability with a throwback vibe, these necks have all the features of the Players Series instruments but with block inlays that make them stand out in a crowd.
Fender replacement necks are made at Fender manufacturing facilities to the same specifications as those used on our instruments. This Ensenada, Mexico-made Telecaster neck features a pau ferro fingerboard with white pearloid block inlays, a 9.5" radius and 22 medium jumbo frets. The maple neck has a comfortable Modern C neck profile that is comfortable for almost any playing style.
The synthetic bone nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing. For true Fender authenticity, it's also serialized and stamped, with genuine headstock spaghetti logo decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
StyleModern
-
Neck ShapeModern "C"
-
Tuner Mounting ConfigDual Guide Pin
-
Fingerboard MaterialPau Ferro
-
Neck MaterialMaple with Walnut Stripe
-
Nut MaterialSillet en os synthétique
-
Position InlaysRectangles blancs en perloïde
-
Neck FinishSatin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
-
Truss Rod Nut3/16" Hex Adjustment
-
Truss RodSingle Action, Head Adjust
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.650" (42 mm)
-
Number of Frets22
-
Fret SizeMedium Jumbo
-
Headstock Thickness.540” (13.71 mm)
-
Neck Thickness1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
-
Peg Hole Diameter.397" (10.08 mm)
Caractéristiques
- Maple fingerboard with white pearloid block inlays
- 9.5" radius with 22 medium jumbo frets
- Modern C neck profile
- Satin urethane finish on back, gloss urethane on headstock face
- Pre-slotted synthetic bone nut
- Six two-guide-pin tuning machine holes
Vous pourriez aussi aimer
Vu récemment
Trouvez un revendeur agréé Fender
Buy Online
Please wait while we search for any available online dealers.
All online dealers listed here will have the specified product in stock, ready for purchase.
Please check back later or close this window and click the "NOTIFY ME WHEN AVAILABLE" button to receive an email when this item is back in stock.